A unique, hand cranked marble run for you to build from precision laser cut MDF parts. Slots and tabs ensure that all parts are aligned.  A minimum of sanding is required.

MDF parts, glue, sandpaper, 9.5mm steel ball bearings and step by step full colour instructions included.

Finished size 160mm x  100mm x 140mm

The motorised level 2 marble run uses a small geared motor to power the stairs type lifting mechanism. Made from precision laser cut MDF and plywood. Plated steel axles, 5mm steel balls, motor, battery box, switch, glue, sandpaper and full assembly instructions are included

Although you can build it without, it is recommended that the battery box, motor unit and switch are soldered for best results.

Requires 2 x AA batteries – not included.

Finished size 140mmx 130mm x 110mm

Precision laser-cut plywood marble run. Push out the pieces and slot the components together. No glue or special tools required. Ideal for the younger or less dextrous builder, with larger, chunky parts and assembly guide. 54 laser cut pieces,  battery operated motor and gearbox, 8 marbles and fully illustrated instruction book included.

Requires 2 x AA batteries – not included.

Finished size 40mm x 250mm  x 200mm

The all new motor driven lift raises a column of marbles and ejects them one by one, down a slide and onto a series of up to seven miniature trampolines. The marbles bounce their way along before being collected in a spiral cone at the end which returns the marbles to the lift. Most parts slot together – there is a minimal amount of glueing required.
Includes all laser cut wooden parts, glue, battery operated motor and gearbox, marbles, spare parts and full assembly instructions.

Requires 2 x AA batteries- not included.

Finished size 300mm x 325mm x 1350mm (max length using all 7 trampolines)

Hand cranked, geared wheel lift system, 6 step elevator section and split ramp and spiral tracks. Laser cut plywood, steel rods and plastic parts. No glue required. Box includes all parts needed, ball bearings and detailed instructions and videos.

Finished size 255mm x 235mm x 185mm

Hand cranked, geared wheel lift system, 6 step elevator section and accumulator ramp with multi  release drop ramp. Laser cut plywood, steel rods and plastic parts. No glue required. Box includes all parts needed, ball bearings and detailed instructions and videos.

Finished size 255mm x 235mm x 185mm

Unique, crank operated vertical linkage lift and small wheel lift. Two alternating see-saw tracks. Laser cut plywood, steel rods and plastic parts. No glue required. Box includes all parts needed, ball bearings and detailed instructions and videos.

Finished size 255mm x 229 x 204mm

NEW! Steampunk style, light up Chocolate Factory Marble Run kit.
Push out the laser cut parts and assemble a working machine. Crank the handle on this hugely detailed marble run and watch the coloured balls whizz round and round the factory, along tracks and conveyer belts, then back up to the top to start again. Parts are pre coloured and the kit includes LED lights, batteries, fixings and all the tools you need!